The need for coordinating license-free devices in the 2.4GHz band
In recent years, there has been an explosion in license-free devices using the Wi-Fi 2.4GHz spectrum. These devices have been billed as “plug and play,” resulting in a serious misconception about the need for frequency coordination throughout the production industry. That misconception hinges on the flawed belief that the absence of a license means interference is impossible. Simply put, that belief is dead-wrong.
While it is true that a specific license to use the product is not required, there are a significant and growing number of instances in which there may be upwards of more than 50 2.4GHz devices operating in relatively close proximity to one another. These locations include almost all motion picture, television production and news studios, college and professional sporting venues, as well as live performance theaters. One of the best ways to combat this issue isn’t through a technical solution. It is communication between all of the parties involved in the broadcast or event to ensure frequency channels do not interfere with one another.
2.4GHz devices are everywhere
The 2.4GHz spectrum is used for hundreds of devices, including portable billing devices, surveillance systems, restaurant and service facilities, and more. Of course, every user believes he has the most optimal use of the spectrum. A primary purpose of coordination is to allow the maximum use of as many devices as possible without interfering with each other. Most of these devices have multiple channel settings within the 2.4GHz spectrum. Coordination in advance allows for all the devices to work without conflict or disruption.
No production is immune to interference. Sometimes, however, it is at larger events where frequency coordination is paramount. A recent example of this could be seen when technicians were coordinating wireless devices for the recent telecast of the NFL draft.
“At the recent NFL draft at Radio City Music Hall, a 2.4GHz wireless intercom system was fired up,” said Ralph Beaver, manager of the NFL Game Day Coordinators. “Immediately, the NFL IT people were trying to find out why more than half of their many, many laptops in use in the hall had slowed or stopped.
“CP Communications technicians on-site immediately recognized the problem and very quickly changed the settings on the wireless intercom system so as not to occupy that much of the Wi-Fi band. At the same event, a 2.5GHz wireless camera was turned on in the theater. The camera wreaked havoc with the other wireless devices until it was adjusted so that it would not conflict with the 2.4GHz devices.”
Get the TV Tech Newsletter
The professional video industry's #1 source for news, trends and product and tech information. Sign up below.
Human element is key to coordination
Michael Mason, president of CP Communications, believes that one of the best ways to work through this issue is simply communication.
“The fundamental principles of coordination are cooperation and the sharing of information,” Mason said. “There is no difference if you are using 500MHz or 2.4GHz. All parties using RF need to communicate with each other so a plan can be put together to ensure a successful show.
“The challenge with the 2.4GHz band, as well as all other license-free bands, is the lack of understanding that license-free does not mean coordination free. In large venue events, such as NFL’s Super Bowl or MLB All-Star Game, great expense, (both time and money) is put forth on frequency coordination.”
The larger issue is the sheer volume of mobile devices.
“Unfortunately, there are tens of thousands of handheld devices and/or smartphones that come into these venues that we will have no control over,” Mason said. “These can and will adversely affect the spectrum. While they may not be permitted to access the Internet through the Wi-Fi systems in the venues, they are constantly pinging them, looking for access.
“This constant chatter alone raises the noise floor tremendously. Taking this into consideration, it is critical that the users who do have control over their equipment coordinate with each other by sharing information and steering their equipment toward the usable parts of the spectrum.”
Henry Cohen of Production Radio Rentals, a supplier and integrator of communication devices for special events, says he believes that along with communication, pre-planning needs to be a part of frequency coordination.
“…Coordinating the unlicensed bands (generally 900-928MHz in the United States, 1.92-1.93GHz, 2.405-2.485GHz, and the 5GHz U-NII sub-bands) has become an absolute requirement in most special and high profile events,” Cohen said. “Many bad experiences have managed to get the attention of management.
“A significant element of coordination is to clearly communicate the policies governing equipment operations to all event vendors, participants, venue administration and in particular, IT departments during the planning phase(s).
“As this remains a somewhat new concept to most entities involved in productions, time is generally required to find and contact the appropriate technical individuals and educate them so they can acquire the proper equipment needed to manage spectrum coordination.”
Most IT department technicians have little concept of, or experience with, the production world and the dynamically growing requirement for RF communications to support ever increasing levels of production. IT technicians’ training and experience rarely goes beyond the plug-and-play concept, or the use of non-overlapping channels and possibly transmission power levels. They generally believe that latency is not a problem; and are unaware of the consequences of just sending the information packet again and again.
Aid from technological advances
In addition to resolving this issue via communication, manufacturers are developing products to help with frequency coordination. Companies like Clear-Com, HME, CoachComm and others have built in various channel configurations in their 2.4GHz products. HME has reached out to some of the wireless DMX receiver/transmitter manufacturers to coordinate the channel configuration schemes among manufacturers.
It is also appropriate to mention that other license-free spectrum, such as that used by DECT (Digital Enhanced Cordless Telecommunications) wireless telephone systems (various spectrums in Europe and the United States), can and will interfere with each other as well as other services. Some production communications manufacturers have designed wireless stage management systems using the DECT platform, further exacerbating the problem of license-free without frequency coordination.
Frequency coordination is the most effective way to guarantee the proper operation of all devices at a particular event, whether it is the Super Bowl or a Sunday church service. Taking the time to plan the use of the available spectrum will have positive results for everyone. A very good reason to coordinate is that if everyone coordinates at a particular event, then everyone can be protected by the frequency coordinator.
Larry Estrin is a Strategic Technology Consultant for Clear-Com, a global leader in critical voice communication systems.